Regardless whether it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always working is very important. In fact, bulbs are wearing auto parts that will undoubtedly burn out after awhile and therefore need to be swapped out. You’re probably on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Lexus CT’s license plate bulb, we’ve made this content page to help you do it without any help and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Lexus CT.
How to swap the license plate bulb on your Lexus CT coming from the outside
This solution is the most simple of the two, in truth, for this one you will only require to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this document to clarify the approach.
So let’s start with changing the number plate bulb by going through the outside of your Lexus CT. Regardless whether it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple actions to stick to to perform this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lexus CT
- Use your screwdriver or knife to eject the bulb from its spot, in the event you are scared of destroying anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the successfulness of the procedure.
.
How to change the number plate bulb on your Lexus CT without outside access
Second section of our content, swap this license plate bulb on your Lexus CT without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Lexus CT
To swap the one on the front plate, nothing could be simpler, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much force otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Lexus CT
Finally last solution, you must swap the bulb on the backplate of your Lexus CT, but you cannot open the cover from the outside of your automobile. In this case, here is the technique to operate this operation:
- Disconnect the battery from your Lexus CT
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Lexus CT, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for changing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to realize it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Lexus CT. If you desire to change other bulbs like the position light bulbs on your Lexus CT or the low beam bulbs on Lexus CT, don’t be reluctant to browse our content articles which describe you the process to follow.
If you need more tutorials on the Lexus CT, go to our Lexus CT category.
