Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always effective is necessary. In reality, bulbs are wearing parts that will undoubtedly burn out as time passes and as a result need to be changed. You’re quite likely on this website because one of your parking lights is burnt out and you’re struggling with how to change your Audi S5’s license plate bulb, we’ve created this article content to help you do it all on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Audi S5.

change-license-plate-bulb-audi-s5

How to replace the license plate bulb on your Audi S5 throughout the outside

This option is the most simple of the two, actually, for this one you will simply have to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content to describe the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Audi S5. Regardless it’s the front or the back of your car the procedure will be similar.
Here are a few simple steps to follow to execute this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Audi S5
  • .

  • Use your screwdriver or knife to remove the bulb from its spot, if you are worried of destroying something, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the process.

How to replace the number plate bulb on your Audi S5 without outside access

Second part of our content page, change this license plate bulb on your Audi S5 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Audi S5

To replace the one on the front plate, nothing could be less complicated, you will have to put yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much force or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Audi S5

Finally last option, you must replace the bulb on the backplate of your Audi S5, but you cannot open the cover from the outside of your car. In this case, here is the approach to operate this task:

  • Unplug the battery from your Audi S5
  • Identify the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Audi S5, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Audi S5. If you wish to change other bulbs like the position light bulbs on your Audi S5 or the low beam bulbs on Audi S5, don’t hesitate to consult our articles which explain you the procedure to follow.

If you wish more tutorials on the Audi S5, go to our Audi S5 category.