It doesn’t matter if it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly functional is very important. In fact, bulbs are wearing auto parts that will inevitably burn out after awhile and as a result need to be replaced. You’re most certainly on this site because one of your parking lights is burnt out and you’re questioning how to change your Audi E-Tron’s license plate bulb, we’ve created this document to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Audi E-Tron.
How to swap the license plate bulb on your Audi E-Tron through the outside
This approach is the most simple of the two, in fact, for this one you will just require to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this content page to show you the approach.
So let’s start with changing the number plate bulb by going through the outside of your Audi E-Tron. It doesn’t matter if it’s the front or the back of your motor vehicle the method will be similar.
Here are a few simple guidelines to stick to to perform this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Audi E-Tron
- Use your screwdriver or knife to remove the bulb from its placement, in the event you are worried of damaging something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the task.
.
How to replace the number plate bulb on your Audi E-Tron without outside access
Second section of our content page, replace this license plate bulb on your Audi E-Tron without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Audi E-Tron
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Audi E-Tron
Finally last solution, you must swap the bulb on the backplate of your Audi E-Tron, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the approach to conduct this task:
- Unplug the battery from your Audi E-Tron
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Audi E-Tron, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main ways for changing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to realize it following the outline of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Audi E-Tron. If you want to change other bulbs like the position light bulbs on your Audi E-Tron or the low beam bulbs on Audi E-Tron, don’t be reluctant to read our content articles which describe you the procedure to follow.
If perhaps you have any additional questions about the Audi E-Tron, do not hesitate to consult our Audi E-Tron category.
