It doesn’t matter if for your personal security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always functional is very important. In reality, bulbs are wearing parts that will definitely burn out after a while and therefore need to be changed. You’re quite likely here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Toyota Aygo 2, we’ve made this content to help you do it without help and not have to go to your auto mechanic. In a first step, we will examine controling a burnt-out front turn signal bulb on your Toyota Aygo 2 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-toyota-aygo-2

How to find out if the front turn signal bulb on your Toyota Aygo 2 is burnt out or needs to be replaced?

When you drive your automobile you don’t constantly have the opportunity to check all the security components of your Toyota Aygo 2. In reality, you are frequently in a rush and tend to get into your automobile, make your journey and put it down right away without taking the time to do an regular check-up. It is as a result important to take the time to sometimes check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Toyota Aygo 2, but that you didn’t notice it. Here are the two simple options to examine if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functional.
  • By hearing to the sound of your blinkers. In reality, there is an audible indication on each car that alerts you of a front turn indicator bulb burnt out on your Toyota Aygo 2, you will identify that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual examine as on the first methodology shown earlier mentioned.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to conduct this substitution.

Changing the front turn signal bulb on your Toyota Aygo 2

Now let’s go to the most significant step of this content, how to replace the front turn signal bulb of your Toyota Aygo 2? You should be aware that this technique is really easy, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Toyota Aygo 2. If it is a bulb on your rear turn signal, see our specific content. Nevertheless, here are the details of the simple steps to stick to to be able to carry out this act properly dependant on the approach you want to choose.

Change front turn signal bulb on your Toyota Aygo 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Toyota Aygo 2 by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Toyota Aygo 2 through the wheel arch:

    This procedure is in particular valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Toyota Aygo 2 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will describe them now:

    • Put your Toyota Aygo 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be vulnerable.
    • Remove your headlight block and change the front turn indicator bulb of your Toyota Aygo 2 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    In the event that you have any additional questions about the Toyota Aygo 2, do not hesitate to consult our Toyota Aygo 2 category.