Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always functioning is extremely important. In reality, bulbs are wearing auto parts that will obviously burn out as time passes and consequently need to be replaced. You’re almost certainly in this article because one of your parking lights is burnt out and you’re wondering how to change your Audi Tt’s license plate bulb, we’ve written and published this document to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Audi Tt.

change-license-plate-bulb-audi-tt

How to replace the license plate bulb on your Audi Tt throughout the outside

This technique is the fastest of the two, in fact, for this one you will only require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this content page to describe the method.
So let’s begin with changing the number plate bulb by going through the outside of your Audi Tt. Regardless it’s the front or the back of your car the process will be similar.
Here are a few simple steps to follow to execute this maintenance:

  • With the engine turned off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Audi Tt
  • .

  • Use your screwdriver or knife to eject the bulb from its spot, in the event you are scared of damaging something, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and check the light to confirm the achievement of the operation.

How to change the number plate bulb on your Audi Tt without outside access

Second part of our item, change this license plate bulb on your Audi Tt without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Audi Tt

To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much pressure or you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.

How to replace the rear license plate bulb on my Audi Tt

Finally last solution, you must replace the bulb on the backplate of your Audi Tt, but you cannot open the cover from the outside of your car. In this instance, here is the tactic to conduct this operation:

  • Disconnect the battery from your Audi Tt
  • Identify the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Audi Tt, check it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have discovered the main techniques for changing license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Audi Tt. If you want to change other bulbs like the position light bulbs on your Audi Tt or the low beam bulbs on Audi Tt, don’t hesitate to browse our articles which explain you the procedure to follow.

If you need more tutorials on the Audi Tt, go to our Audi Tt category.