Whether you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your car to blame – your low beams. Despite the fact this adjustment may look easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary realignment, and in this document, we will discover how to adjust the low beam lights of your Alfa Romeo Giulietta? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Alfa Romeo Giulietta.
Why adjust the low beam lights of your Alfa Romeo Giulietta?
So let’s start our document with the advantage of adjusting the low beam lights of your Alfa Romeo Giulietta. For many people these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the low beams of your Alfa Romeo Giulietta are not lighting up well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Alfa Romeo Giulietta for safety is a good option.
First of all, the adjusting of the dipped headlights of an Alfa Romeo Giulietta must be done for a ordinary safety cause. Regardless it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Alfa Romeo Giulietta for law motives
Additionally to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Alfa Romeo Giulietta?
We will now go forward to the part that interests you the most in this document, how to adjust the low beams of his Alfa Romeo Giulietta? This setting may seem to be a bit difficult, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Alfa Romeo Giulietta
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Alfa Romeo Giulietta
Once your car is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Alfa Romeo Giulietta (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Alfa Romeo Giulietta is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Alfa Romeo Giulietta, please browse our document on this subject.
To find more tips on the Alfa Romeo Giulietta, take a look at the Alfa Romeo Giulietta category.
