It doesn’t matter if for your own security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always working is imperative. Indeed, bulbs are wearing parts that will predictably burn out with time and consequently need to be replaced. You’re almost certainly in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Volkswagen Up!, we’ve written and published this content to help you do it by yourself and not have to go to your auto technician. In a first section, we will have a look at the checking a burnt-out front turn signal bulb on your Volkswagen Up! and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-volkswagen-up!

How to recognise if the front turn signal bulb on your Volkswagen Up! is burnt out or needs to be changed?

When you drive your automobile you don’t always have the possibility to check all the security equipments of your Volkswagen Up!. Indeed, you are nearly always in a hurry and tend to get into your automobile, make your trip and put it down instantly without taking the time to do an periodic check-up. It is as a result essential to take the time to sometimes check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Volkswagen Up!, but that you didn’t realize it. Here are the two simple methods to control if a front turn signal is burnt out or if you need to change it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functioning.
  • By hearing to the sound of your blinkers. Indeed, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Volkswagen Up!, you will perceive that the time between each “click” is much closer, this means that you will have to swap the front turn signal bulb or before. It’s up to you to check and check which one is burnt out by a visual control as on the first solution shown earlier mentioned.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to complete this substitution.

Changing the front turn signal bulb on your Volkswagen Up!

Now let’s go to the main section of this content, how to replace the front turn signal bulb of your Volkswagen Up!? Please note that this procedure is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Volkswagen Up!. If it is a bulb on your rear turn signal, see our specific content. On the other hand, here are the details of the actions to stick to to be able to conduct this act accurately dependant on the strategy you wish to adopt.

Replace front turn signal bulb on your Volkswagen Up! through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Volkswagen Up! by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb is effective.

    • Replace the front turn signal bulb of your Volkswagen Up! through the wheel arch:

    This procedure is specifically useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same steps as on the part previously seen.

    Replace the front turn signal bulb of your Volkswagen Up! through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them right now:

    • Put your Volkswagen Up! on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be vulnerable.
    • Take out your headlight block and change the front turn indicator bulb of your Volkswagen Up! following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To get more tips on the Volkswagen Up!, take a look at the Volkswagen Up! category.