Regardless whether for your personal security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always working is extremely important. In reality, bulbs are wearing parts that will definitely burn out as time passes and as a consequence need to be replaced. You’re almost certainly in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Volkswagen Polo 3, we’ve written this content page to help you do it alone and independently and not have to go to your auto mechanic. In a first section, we will look at controling a burnt-out front turn signal bulb on your Volkswagen Polo 3 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-volkswagen-polo-3

How to recognize if the front turn signal bulb on your Volkswagen Polo 3 is burnt out or needs to be swapped out?

When you drive your motor vehicle you don’t constantly have the opportunity to check all the security components of your Volkswagen Polo 3. In reality, you are in general in a hurry and tend to get into your motor vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is consequently essential to take the time to in some cases check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Volkswagen Polo 3, but that you didn’t become aware of it. Here are the two simple options to check if a front turn signal is burnt out or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are functioning.
  • By listening to the sound of your blinkers. In reality, there is an audible indication on each car that signals you of a front turn indicator bulb burnt out on your Volkswagen Polo 3, you will notice that the time between each “click” is much shorter, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to check and make sure which one is burnt out by a visual check as on the first process shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t hesitate to consult our content articles to help you to accomplish this substitution.

Replacing the front turn signal bulb on your Volkswagen Polo 3

Now let’s go to the main section of this content page, how to change the front turn signal bulb of your Volkswagen Polo 3? Take note that this technique is very simple, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Volkswagen Polo 3. If it is a bulb on your rear turn signal, see our special content page. On the other hand, here are the details of the guidelines to follow to be able to conduct this action efficiently according to the method you wish to adopt.

Replace front turn signal bulb on your Volkswagen Polo 3 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Volkswagen Polo 3 by the new one (ensure to check if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb is effective.

    • Replace the front turn signal bulb of your Volkswagen Polo 3 through the wheel arch:

    This procedure is in particular practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Change the front turn signal bulb of your Volkswagen Polo 3 through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them now:

    • Put your Volkswagen Polo 3 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be breakable.
    • Remove your headlight block and replace the front turn indicator bulb of your Volkswagen Polo 3 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If perhaps you have any further questions about the Volkswagen Polo 3, do not hesitate to consult our Volkswagen Polo 3 category.