It doesn’t matter if for your own security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functional is very important. In reality, bulbs are wearing parts that will undoubtedly burn out after a while and as a result need to be changed. You’re perhaps on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Lancia Ypsilon, we’ve written and published this content page to help you do it without help and not have to go to your repair shop. In a first part, we will take a look at the checking a burnt-out front turn signal bulb on your Lancia Ypsilon and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-lancia-ypsilon

How to know if the front turn signal bulb on your Lancia Ypsilon is burnt out or needs to be changed?

When you drive your automobile you don’t constantly have the possibility to check all the security equipments of your Lancia Ypsilon. In reality, you are in general in a rush and tend to enter into your automobile, make your journey and put it down instantly without taking the time to do an regular check-up. It is as a consequence relevant to take the time to sometimes check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Lancia Ypsilon, but that you didn’t notice it. Here are the two simple techniques to examine if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are operational.
  • By listening to the sound of your blinkers. In reality, there is an audible sign on each car that signals you of a front turn indicator bulb burnt out on your Lancia Ypsilon, you will recognize that the time between each “click” is much shorter, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to check and examine which one is burnt out by a visual examine as on the first procedure shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to browse our articles to help you to achieve this replacing.

Changing the front turn signal bulb on your Lancia Ypsilon

Now let’s go to the most important part of this content page, how to change the front turn signal bulb of your Lancia Ypsilon? Take note that this operation is quite simple, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Lancia Ypsilon. If it is a bulb on your rear turn signal, see our special content page. On the other hand, here are the details of the actions to follow in order to conduct this act accurately dependant on the solution you desire to choose.

Replace front turn signal bulb on your Lancia Ypsilon through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Lancia Ypsilon by the new one (make certain to check if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb works.

    • Replace the front turn signal bulb of your Lancia Ypsilon through the wheel arch:

    This tactic is extremely practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Lancia Ypsilon through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them right now:

    • Put your Lancia Ypsilon on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be delicate.
    • Take away your headlight block and replace the front turn indicator bulb of your Lancia Ypsilon following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you want more tutorials on the Lancia Ypsilon, go to our Lancia Ypsilon category.