Regardless whether for your own security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always working is very important. In reality, bulbs are wearing parts that will definitely burn out as time passes and as a result need to be replaced. You’re likely on this site because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Ford Mondeo, we’ve made this content page to help you do it on your own and not have to go to your mechanic. In a first step, we will have a look at the checking a burnt-out front turn signal bulb on your Ford Mondeo and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-mondeo

How to find out if the front turn signal bulb on your Ford Mondeo is burnt out or needs to be replaced?

When you drive your automobile you don’t constantly have the possibility to verify all the security components of your Ford Mondeo. In reality, you are in many cases in a hurry and tend to get into your automobile, make your journey and put it down immediately without taking the time to do an occasional check-up. It is consequently relevant to take the time to sometimes verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford Mondeo, but that you didn’t detect it. Here are the two simple solutions to check if a front turn signal is burnt out or if you need to swap it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are working.
  • By listening to the sound of your blinkers. In reality, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Ford Mondeo, you will perceive that the time between each “click” is much shorter, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual check as on the first methodology shown earlier mentioned.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t hesitate to read our content articles to help you to accomplish this replacing.

Changing the front turn signal bulb on your Ford Mondeo

Now let’s go to the main step of this content page, how to change the front turn signal bulb of your Ford Mondeo? You should be aware that this procedure is uncomplicated, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Ford Mondeo. If it is a bulb on your rear turn signal, see our special content page. However, here are the details of the steps to follow to be able to accomplish this act efficiently according to the approach you want to choose.

Replace front turn signal bulb on your Ford Mondeo through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford Mondeo by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Ford Mondeo through the wheel arch:

    This methodology is in particular effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Change the front turn signal bulb of your Ford Mondeo through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them right now:

    • Put your Ford Mondeo on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take away your headlight block and swap the front turn indicator bulb of your Ford Mondeo following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To discover more tips on the Ford Mondeo, take a look at the Ford Mondeo category.