Car mirrors are one of the most vital security features that you need to always make certain are functioning correctly, because it is your safety, the safety of other drivers and your wallet because you can be fined if you have a defective mirror. This is the case that interests us in this article, you have suffered a collision, one of your mirrors is damaged and you are now wondering how to change a side mirror on your Lancia Ypsilon? You are at the right place, we will explain all the procedures to help you replace it in the correct way. First, we’ll consider what attracts you in this article, how to change a complete side mirror on your Lancia Ypsilon, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Lancia Ypsilon?
Let’s go, we start this guide with the part that probably concerns you the most, how to replace a side mirror on my Lancia Ypsilon? This operation is quite simple and you should be capable to do it on your own with a minimum amount of tooling. You will just need to remove the plastic cover inside your car’s interior, it is usually clipped on the door. For power mirrors, make sure to unplug the power connector that you will see in back of the cover. Finally, you will have to unscrew the screws that hold the mirror, in general there are three, a simple screwdriver should do just fine to allow you to pass this step of changing the side mirror of your Lancia Ypsilon. Be sure to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not fall out. Finally to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally reposition the plastic cover. That’s it, you’ve just learned how to replace the side mirror of your Lancia Ypsilon, you see it wasn’t that difficult.
How do you just replace the window of the side mirror of my Lancia Ypsilon?
In the event that you simply need to replace the window of the side mirror of your Lancia Ypsilon, you will first need to determine the type of locking of your mirror. To do this, the most basic procedure is to examine the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you need to replace the side mirror glass of your Lancia Ypsilon and it uses a tongue and groove system, you are lucky, it is the least complicated device to remove. All you have to do is to use a plastic object to remove the window “by force”.
- To put it back in place, do the same thing and push it back right into place with force. To check that it is well installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Lancia Ypsilon you will need to identify the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Be sure to keep the spring because it is possible that you have not one provided it with your new window, replace it on your new window, take apart the old one paying attention to the electric cables in the case of defrosting system
.
- Stick to the positioning guide (notch) and gently push it into its housing so as not to break it. Check that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the position of the swivel plate of the window to be changed on the side mirror of your Lancia Ypsilon, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you less complicated access to the device and using a screwdriver, rotate the device.
- If your mirror is built with a defrosting system, do the reverse process to reattach it and check that it is well fixed.
If perhaps you have any further questions about the Lancia Ypsilon, do not hesitate to consult our Lancia Ypsilon category.
