It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always operational is extremely important. In fact, bulbs are wearing parts that will predictably burn out with time and consequently need to be replaced. You’re perhaps on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Buick Lucerne, we’ve written this content page to help you do it all on your own and not have to go to your technician. In a first part, we will take a look at the checking a burnt-out front turn signal bulb on your Buick Lucerne and in a second part, how to change the front turn signal bulb on your car..
How to know if the front turn signal bulb on your Buick Lucerne is burnt out or needs to be replaced?
When you drive your automobile you don’t always have the opportunity to verify all the safety equipments of your Buick Lucerne. In fact, you are in many cases in a hurry and tend to get into your automobile, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result crucial to take the time to in some cases verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Buick Lucerne, but that you didn’t notice it. Here are the two simple methods to verify if a front turn signal is burnt out or if you need to replace it rather quickly:
- When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functional.
- By hearing to the sound of your blinkers. In fact, there is an audible sign on each car that alerts you of a front turn indicator bulb burnt out on your Buick Lucerne, you will recognise that the time between each “click” is much shorter, this means that you will have to change the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual verify as on the first technique shown above.
You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to conduct this substitution.
Replacing the front turn signal bulb on your Buick Lucerne
Now let’s go to the most significant part of this content page, how to replace the front turn signal bulb of your Buick Lucerne? Take note that this process is fairly simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Buick Lucerne. If it is a bulb on your rear turn signal, see our dedicated content page. Nevertheless, here are the details of the steps to stick to in order to conduct this action accurately dependant on the technique you desire to choose.
Change front turn signal bulb on your Buick Lucerne through the bonnet:
- Open your bonnet and clear access to your headlight pods.
- Use a torx tip to open the headlight unit on your car
- Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
- Replace the front flasher bulb of your Buick Lucerne by the new one (make certain to verify if it’s an orange or transparent bulb).
- Reassemble and test that the brand-new front turn signal bulb is effective.
- Lift your car, and take off the front wheel on the side you want to work on.
- Take out your wheel arch with a torx bit.
- Go to your headlamp block and replace the front turn signal bulb on your car following the same basic steps as on the part previously seen.
- Put your Buick Lucerne on a jack or a candle.
- Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be fragile.
- Remove your headlight block and replace the front turn indicator bulb of your Buick Lucerne following the steps seen in the parts seen previously.
- Put the whole thing back together again.
Change the front turn signal bulb of your Buick Lucerne through the wheel arch:
This methodology is especially useful when you don’t have enough space in the bonnet to access the front turn signal on your car:
Replace the front turn signal bulb of your Buick Lucerne through the bumper:
On some years or finishes, dependant on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will detail them right now:
To discover more tips on the Buick Lucerne, take a look at the Buick Lucerne category.