Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car guilty – your headlights, as well named high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Volkswagen Rabbit? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Rabbit.
Why adjust the headlights of your Volkswagen Rabbit?
So let’s start our content with the interest of adjusting the headlights of your Volkswagen Rabbit. For many people, our headlights are adjusted good enough, and they seem to light up enough through the night. Sadly this is not constantly the circumstance and looking at this setting, either because the headlights on your Volkswagen Rabbit are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Volkswagen Rabbit for safety
First of all, the headlight adjustment of a Volkswagen Rabbit must be carried out for a very easy security reason. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Volkswagen Rabbit . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Rabbit for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Rabbit?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Volkswagen Rabbit? This setting might seem a bit complex, but by following the guidance you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Volkswagen Rabbit
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Rabbit
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Volkswagen Rabbit (they are in general designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Volkswagen Rabbit is coherent, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Rabbit, please read our content on this subject.
To find more tips on the Volkswagen Rabbit, take a look at the Volkswagen Rabbit category.
