If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle guilty – your headlights, also called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Ford Flex? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Flex.
Why adjust the headlights of your Ford Flex?
So let’s start our content with the benefit of adjusting the headlights of your Ford Flex. For many people, our headlights are adjusted well enough, and they appear to light up enough at night. Sadly this is not always the case and checking this setting, either because the headlights on your Ford Flex are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Ford Flex for safety
To begin with, the headlight adjustment of a Ford Flex must be carried out for a basic safety explanation. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Ford Flex . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford Flex for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Flex?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Ford Flex? This adjustment may appear a bit difficult, but by following the guidelines you should be able to do it without too much concern.
Preparations to adjust the headlights of a Ford Flex
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Flex
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Ford Flex (they are in general marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Ford Flex is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Ford Flex, please go through our content on this subject matter.
Whenever you have any further questions about the Ford Flex, do not hesitate to consult our Ford Flex category.
