Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car at fault – your headlights, also named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Kia Rio? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Kia Rio.

adjust-headlights-kia-rio

Why adjust the headlights of your Kia Rio?

So let’s start our content with the interest of adjusting the headlights of your Kia Rio. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Unfortunately this is not always the circumstance and checking this setting, either because the headlights on your Kia Rio are not bright enough, or because you have the feeling that they are too weak is a good idea .

Adjusting the high beams of your Kia Rio for safety

To begin with, the headlight adjustment of a Kia Rio must be made for a simple safety motive. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. However, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Kia Rio . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Kia Rio for legal reasons

Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Kia Rio?

We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Kia Rio? This setting may seem a bit difficult, but by simply following the recommendations you should have the ability to accomplish it without too much trouble.

Preparations to adjust the headlights of a Kia Rio

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Kia Rio

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Kia Rio (they are in most cases marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Kia Rio is logical, do not hesitate to verify it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your Kia Rio, please go through our content on this subject matter.

If you have any additional questions about the Kia Rio, do not hesitate to consult our Kia Rio category.