Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car guilty – your headlights, also identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Toyota Land Cruiser Serie 150? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Land Cruiser Serie 150.
Why adjust the headlights of your Toyota Land Cruiser Serie 150?
So let’s start our content page with the interest of adjusting the headlights of your Toyota Land Cruiser Serie 150. For many of us, our headlights are adjusted good enough, and they seem to light up enough at night. Regrettably this is not constantly the circumstance and checking this setting, either because the headlights on your Toyota Land Cruiser Serie 150 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Toyota Land Cruiser Serie 150 for safety
To begin with, the headlight adjustment of a Toyota Land Cruiser Serie 150 must be carried out for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Toyota Land Cruiser Serie 150 . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Land Cruiser Serie 150 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Land Cruiser Serie 150?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Toyota Land Cruiser Serie 150? This setting might seem a bit complex, but by simply following the guidelines you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Toyota Land Cruiser Serie 150
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Land Cruiser Serie 150
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Toyota Land Cruiser Serie 150 (they are generally marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Toyota Land Cruiser Serie 150 is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Toyota Land Cruiser Serie 150, please go through our content page on this subject matter.
To find more tips on the Toyota Land Cruiser Serie 150, take a look at the Toyota Land Cruiser Serie 150 category.
