If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car to blame – your headlights, also known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Toyota Land Cruiser Serie 70? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Land Cruiser Serie 70.
Why adjust the headlights of your Toyota Land Cruiser Serie 70?
So let’s begin our content page with the benefit of adjusting the headlights of your Toyota Land Cruiser Serie 70. For most people, our headlights are adjusted well enough, and they seem to light up enough after dark. Sadly this is not always the case and examining this setting, either because the headlights on your Toyota Land Cruiser Serie 70 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Toyota Land Cruiser Serie 70 for safety
To begin with, the headlight adjustment of a Toyota Land Cruiser Serie 70 must be achieved for a basic safety motive. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Toyota Land Cruiser Serie 70 . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Land Cruiser Serie 70 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Land Cruiser Serie 70?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Toyota Land Cruiser Serie 70? This setting might seem a bit complex, but by simply following the guidance you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Toyota Land Cruiser Serie 70
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Land Cruiser Serie 70
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Toyota Land Cruiser Serie 70 (they are usually designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Toyota Land Cruiser Serie 70 is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Toyota Land Cruiser Serie 70, please read our content page on this subject matter.
If you have any additional questions about the Toyota Land Cruiser Serie 70, do not hesitate to consult our Toyota Land Cruiser Serie 70 category.
