If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car to take responsibility – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Toyota Camry? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Camry.
Why adjust the headlights of your Toyota Camry?
So let’s start our content page with the interest of adjusting the headlights of your Toyota Camry. For many people, our headlights are adjusted good enough, and they appear to light up enough at night. Sadly this is not constantly the circumstance and checking this setting, either because the headlights on your Toyota Camry are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Toyota Camry for safety
First of all, the headlight adjustment of a Toyota Camry must be conducted for a simple safety motive. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Toyota Camry . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Toyota Camry for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Camry?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Toyota Camry? This setting may seem a bit difficult, but by following the guidance you should have the ability to accomplish it without too much concern.
Preparations to adjust the headlights of a Toyota Camry
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Camry
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Toyota Camry (they are in general marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Toyota Camry is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Toyota Camry, please read our content page on this subject.
If perhaps you have any further questions about the Toyota Camry, do not hesitate to consult our Toyota Camry category.
