If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle guilty – your headlights, as well known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Toyota Avalon? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Avalon.
Why adjust the headlights of your Toyota Avalon?
So let’s start our content page with the benefit of adjusting the headlights of your Toyota Avalon. For most people, our headlights are adjusted well enough, and they seem to light up enough at night. Regrettably this is not constantly the case and examining this setting, either because the headlights on your Toyota Avalon are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Toyota Avalon for safety
To begin with, the headlight adjustment of a Toyota Avalon must be finished for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Toyota Avalon . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Avalon for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Avalon?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Toyota Avalon? This adjustment might seem a bit difficult, but by following the instructions you should have the ability to complete it without too much problem.
Preparations to adjust the headlights of a Toyota Avalon
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Avalon
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Toyota Avalon (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Toyota Avalon is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Toyota Avalon, please read our content page on this subject.
If perhaps you have any further questions about the Toyota Avalon, do not hesitate to consult our Toyota Avalon category.
