Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car guilty – your headlights, as well known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Renault Kangoo 2? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Kangoo 2.
Why adjust the headlights of your Renault Kangoo 2?
So let’s start our article with the interest of adjusting the headlights of your Renault Kangoo 2. For many people, our headlights are adjusted well enough, and they appear to light up enough during the night. Regrettably this is not always the circumstance and examining this setting, either because the headlights on your Renault Kangoo 2 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Renault Kangoo 2 for safety
First of all, the headlight adjustment of a Renault Kangoo 2 must be conducted for a basic security reason. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Renault Kangoo 2 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Renault Kangoo 2 for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Kangoo 2?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Renault Kangoo 2? This adjustment may seem a bit complicated, but by following the instructions you should have the ability to accomplish it without too much trouble.
Preparations to adjust the headlights of a Renault Kangoo 2
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Kangoo 2
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Renault Kangoo 2 (they are usually designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Renault Kangoo 2 is coherent, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Renault Kangoo 2, please read our article on this subject matter.
If you wish more tutorials on the Renault Kangoo 2, go to our Renault Kangoo 2 category.
