Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle guilty – your headlights, as well named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Renault Megane 3? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Megane 3.
Why adjust the headlights of your Renault Megane 3?
So let’s begin our article with the interest of adjusting the headlights of your Renault Megane 3. For the majority of us, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Sadly this is not constantly the case and checking this setting, either because the headlights on your Renault Megane 3 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Renault Megane 3 for safety
First of all, the headlight adjustment of a Renault Megane 3 must be achieved for a very easy safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Renault Megane 3 . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Renault Megane 3 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Megane 3?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Renault Megane 3? This adjustment may seem a bit difficult, but by following the instructions you should have the ability to accomplish it without too much concern.
Preparations to adjust the headlights of a Renault Megane 3
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Megane 3
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Renault Megane 3 (they are usually designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Renault Megane 3 is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Renault Megane 3, please go through our article on this subject.
To get more tips on the Renault Megane 3, take a look at the Renault Megane 3 category.
