If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car to blame – your headlights, as well called high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Renault Clio 2? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Clio 2.
Why adjust the headlights of your Renault Clio 2?
So let’s start our article with the interest of adjusting the headlights of your Renault Clio 2. For the majority of us, our headlights are adjusted sufficiently, and they seem to light up enough through the night. Unfortunately this is not constantly the case and looking at this setting, either because the headlights on your Renault Clio 2 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Renault Clio 2 for safety
To begin with, the headlight adjustment of a Renault Clio 2 must be finished for a very easy security reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Renault Clio 2 . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Renault Clio 2 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Clio 2?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Renault Clio 2? This adjustment may seem a bit difficult, but by simply following the guidance you should be able to do it without too much issue.
Preparations to adjust the headlights of a Renault Clio 2
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Clio 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Renault Clio 2 (they are generally designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Renault Clio 2 is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Renault Clio 2, please browse our article on this subject matter.
To discover more tips on the Renault Clio 2, take a look at the Renault Clio 2 category.
