If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car responsible – your headlights, also often known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Lexus UX? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Lexus UX.
Why adjust the headlights of your Lexus UX?
So let’s start our content with the benefit of adjusting the headlights of your Lexus UX. For most of us, our headlights are adjusted well enough, and they appear to light up enough at night. Sadly this is not always the circumstance and checking this setting, either because the headlights on your Lexus UX are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Lexus UX for safety
To begin with, the headlight adjustment of a Lexus UX must be carried out for a simple security explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Lexus UX . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Lexus UX for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Lexus UX?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Lexus UX? This setting may seem a bit difficult, but by simply following the guidelines you should be able to complete it without too much concern.
Preparations to adjust the headlights of a Lexus UX
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Lexus UX
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Lexus UX (they are generally designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Lexus UX is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Lexus UX, please go through our content on this subject matter.
To discover more tips on the Lexus UX, take a look at the Lexus UX category.
