Regardless it’s for your own personal safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are all the time working is extremely important. In reality, bulbs are wearing units that will surely burn out over time and as a consequence need to be replaced. You’re perhaps on this website because one of your parking lights is burnt out and you’re worried about how to change your Lexus UX’s license plate bulb, we’ve created this content page to help you do it without any help and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Lexus UX.
How to replace the license plate bulb on your Lexus UX coming from the outside
This solution is the least difficult of the two, in reality, for this one you will just need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this article content to clarify the way.
So let’s start with swapping the number plate bulb by going through the outside of your Lexus UX. Regardless it’s the front or the back of your motor vehicle the procedure will be identical.
Here are a few simple actions to follow to conduct this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lexus UX
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are worried of damaging a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the success of the process.
.
How to replace the number plate bulb on your Lexus UX without outside access
Second section of our article, change this license plate bulb on your Lexus UX without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Lexus UX
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much pressure or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Lexus UX
Finally last option, you must replace the bulb on the backplate of your Lexus UX, but you cannot open the cover from the outside of your motor vehicle. In this case, here is the method to accomplish this task:
- Disconnect the battery from your Lexus UX
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Lexus UX, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for swapping license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Lexus UX. If you wish to change other bulbs like the position light bulbs on your Lexus UX or the low beam bulbs on Lexus UX, don’t hesitate to read our content articles which explain you the process to follow.
To find more tips on the Lexus UX, take a look at the Lexus UX category.
