If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to blame – your headlights, as well named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Hyundai Kona? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Hyundai Kona.
Why adjust the headlights of your Hyundai Kona?
So let’s begin our content with the interest of adjusting the headlights of your Hyundai Kona. For the majority of us, our headlights are adjusted well enough, and they seem to light up enough at night. Regrettably this is not constantly the circumstance and examining this setting, either because the headlights on your Hyundai Kona are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Hyundai Kona for safety
To begin with, the headlight adjustment of a Hyundai Kona must be conducted for a basic safety reason. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. However, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Hyundai Kona . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Hyundai Kona for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Hyundai Kona?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Hyundai Kona? This adjustment may seem a bit complicated, but by simply following the guidelines you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Hyundai Kona
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Hyundai Kona
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Hyundai Kona (they are in general marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Hyundai Kona is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Hyundai Kona, please go through our content on this subject matter.
If you want more guides on the Hyundai Kona, go to our Hyundai Kona category.
