Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car at fault – your headlights, as well often known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Hyundai Genesis? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Hyundai Genesis.
Why adjust the headlights of your Hyundai Genesis?
So let’s begin our article with the benefit of adjusting the headlights of your Hyundai Genesis. For many of us, our headlights are adjusted well enough, and they appear to light up enough at nighttime. Regrettably this is not constantly the case and checking this setting, either because the headlights on your Hyundai Genesis are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Hyundai Genesis for safety
To begin with, the headlight adjustment of a Hyundai Genesis must be made for a simple security reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Hyundai Genesis . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Hyundai Genesis for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Hyundai Genesis?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Hyundai Genesis? This setting might seem a bit difficult, but by simply following the guidance you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Hyundai Genesis
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Hyundai Genesis
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Hyundai Genesis (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Hyundai Genesis is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Hyundai Genesis, please go through our article on this subject.
To find more tips on the Hyundai Genesis, take a look at the Hyundai Genesis category.
