If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to take responsibility – your headlights, as well named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Ford Puma? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Puma.
Why adjust the headlights of your Ford Puma?
So let’s start our content with the interest of adjusting the headlights of your Ford Puma. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough at night. Regrettably this is not always the case and checking this setting, either because the headlights on your Ford Puma are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Ford Puma for safety
First of all, the headlight adjustment of a Ford Puma must be done for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Ford Puma . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Ford Puma for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Puma?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Ford Puma? This adjustment may seem a bit difficult, but by simply following the guidelines you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Ford Puma
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Puma
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Ford Puma (they are usually marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Ford Puma is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Ford Puma, please browse our content on this subject matter.
If you want more guides on the Ford Puma, go to our Ford Puma category.
