If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car guilty – your headlights, as well known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Bmw Serie 3 F30? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 3 F30.
Why adjust the headlights of your Bmw Serie 3 F30?
So let’s start our content with the interest of adjusting the headlights of your Bmw Serie 3 F30. For most people, our headlights are adjusted good enough, and they seem to light up enough at night. Unfortunately this is not constantly the circumstance and looking at this setting, either because the headlights on your Bmw Serie 3 F30 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Bmw Serie 3 F30 for safety
First of all, the headlight adjustment of a Bmw Serie 3 F30 must be conducted for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Bmw Serie 3 F30 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Bmw Serie 3 F30 for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Bmw Serie 3 F30?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Bmw Serie 3 F30? This adjustment may seem a bit difficult, but by simply following the guidance you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Bmw Serie 3 F30
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Bmw Serie 3 F30
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Bmw Serie 3 F30 (they are in most cases designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Bmw Serie 3 F30 is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Bmw Serie 3 F30, please go through our content on this subject matter.
To find more tips on the Bmw Serie 3 F30, take a look at the Bmw Serie 3 F30 category.
