The safety of a car is important. Whether or not the Ford Puma are economic holes, certain maintenance acts are essential. In this article we will explain to you when to change the brake discs of your Ford Puma? To get this done, first of all, we will find out what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Ford Puma, and, finally, how to change them with new ones.
Interest of the brake discs of a Ford Puma
We begin our content by explaining what the brake discs of a Ford Puma are used for, it will allow you to discover why it is necessary to make certain that they are always in good functioning order.
Brake discs are the main part of your braking system. Obviously, braking on an Ford Puma is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will cause your Ford Puma to brake.
When to change the brake discs of a Ford Puma?
We will now move on to the section that certainly attracts you to this article, namely, when changing the brake discs of a Ford Puma? How we explained it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, with time and specifically the friction when braking wears out and loses braking power. We will now outline the different ways to know when to change them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Ford Puma , however it is necessary to know that dependent on your driving style and the type of journey this can vary significantly. Indeed, if you principally drive on the motorway and your brakes are only slightly used, this amount can increase, conversely, if you only drive in built-up areas, it can reduce.
- A simple and effective way to identify the condition of the brake discs on your car is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual way to know when to change the brake discs on your Ford Puma is to remove the wheels after the vehicle has been set on stands. Once taken out, you will be able to access your discs and verify their condition. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Ford Puma?
Finally, to end this article we will quickly describe how to change the brake discs of your Ford Puma. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Ford Puma, don’t think twice to consult our article which explains you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Ford Puma on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
To discover more tips on the Ford Puma, take a look at the Ford Puma category.
