If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car responsible – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Ford Fusion? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Fusion.
Why adjust the headlights of your Ford Fusion?
So let’s start our content page with the benefit of adjusting the headlights of your Ford Fusion. For many people, our headlights are adjusted good enough, and they seem to light up enough after dark. However this is not always the case and looking at this setting, either because the headlights on your Ford Fusion are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Ford Fusion for safety
To begin with, the headlight adjustment of a Ford Fusion must be finished for a basic security explanation. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Ford Fusion . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Ford Fusion for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Fusion?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Ford Fusion? This adjustment may seem a bit complex, but by following the recommendations you should be able to complete it without too much issue.
Preparations to adjust the headlights of a Ford Fusion
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Fusion
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Ford Fusion (they are usually designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Ford Fusion is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Ford Fusion, please go through our content page on this subject matter.
Whenever you have any further questions about the Ford Fusion, do not hesitate to consult our Ford Fusion category.
