Having a issue with your motor vehicle is basic, because unfortunately recent automobiles are more and more complex and consequently exposed to more and more possible breakdowns. In this article we’re going to try to help you to fix an injection problem on your Ford Fusion . This is a issue that is especially bothersome because it can sooner or later bring your vehicle to non starting or damaged engine unit. To get this done, first we will find out how injection works, then, what are the different problems that can exist on a Ford Fusion injectors , and finally, how to fix them.
What is the purpose of the injection of a Ford Fusion?
So we begin our content page by promptly explaining how an injection system works so that you have all the information you need to understand the failure affiliated with it. < br>
The injection system of a Ford Fusion handles the fuel intake into the engine unit , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to discharge the fuel in the engine unit. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Ford Fusion. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and consequently a better combustion.
What are the different injection complications on Ford Fusion?
Now in this second component, we are going to explore the different injection complications and their signs of illness that you may possibly encounter on your Ford Fusion .
Injection pump complications Ford Fusion
To start, we will find out the injection pump complications on your Ford Fusion, there are not many of them, they are often frequent but we will highlight them down below:
- Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will bring about a bad air/fuel mixture and consequently a bad combustion and thus alter the performance of the engine unit of your Ford Fusion.
- Leakage from the injection pump of your Ford Fusion: If you have a significant leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good
.
Regarding the results and signs of illness of a fuel pump issue on a Ford Fusion , you will undoubtedly experience, a lack of power, your engine unit grazing, dark smoke emissions…
Injectors complications Ford Fusion
Now we move on to the injector problems on Ford Fusion . Injectors are the end of your injection system, here are the different complications you may possibly encounter:
- Dirty Ford Fusion injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are totally clogged. So you will potentially have one or more cylinders that are not working effectively.
- Leaky Ford Fusion injector: It’s often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Ford Fusion HS: This is the case when your injectors are totally clogged or when you have an electronic problem, it will not let anything go.
Regarding the signs of illness of injector complications on your Ford Fusion it is about the same as for a faulty injection pump. You may possibly encounter problems with starting, throttle response, power loss, and smoke emission.
How to get rid of an injection issue on a Ford Fusion?
To end our article on the injection complications on Ford Fusion , we will try to give you the solutions that exist to fix these complications.
If after a precise investigation it’s your injection pump that is the source of your complications, it will unfortunately be very difficult to intervene on the trouble without replacing the component, this change often goes with the replacement of the injectors, and sometimes the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Regarding a issue with an injector there are various solutions depending on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Ford Fusion, do not think twice to seek advice from our content page on this subject to get the procedure. If it doesn’t work, you will have to change them.
- Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to change it, do not think twice to seek advice from our content page on the injectors that leak on Ford Fusion, to have all the solutions available to you.
- Injector HS: Finally, last solution, your injector is broken or doesn’t work anymore, in general, the replacement of an injector costs around 500 euros labor included.
To find more tips on the Ford Fusion, take a look at the Ford Fusion category.
