Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to blame – your headlights, also identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Ford F 550? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford F 550.
Why adjust the headlights of your Ford F 550?
So let’s begin our article with the benefit of adjusting the headlights of your Ford F 550. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. However this is not constantly the circumstance and checking this setting, either because the headlights on your Ford F 550 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Ford F 550 for safety
First of all, the headlight adjustment of a Ford F 550 must be achieved for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Ford F 550 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford F 550 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford F 550?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Ford F 550? This setting may appear a bit complex, but by following the recommendations you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Ford F 550
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ford F 550
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Ford F 550 (they are usually marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Ford F 550 is logical, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Ford F 550, please go through our article on this subject.
To get more tips on the Ford F 550, take a look at the Ford F 550 category.
