Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle responsible – your headlights, as well known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Fiat Stilo? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Stilo.
Why adjust the headlights of your Fiat Stilo?
So let’s begin our article with the benefit of adjusting the headlights of your Fiat Stilo. For many of us, our headlights are adjusted well enough, and they seem to light up enough at nighttime. However this is not always the case and looking at this setting, either because the headlights on your Fiat Stilo are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Fiat Stilo for safety
To begin with, the headlight adjustment of a Fiat Stilo must be finished for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Fiat Stilo . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Fiat Stilo for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Stilo?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Fiat Stilo? This setting may appear a bit difficult, but by following the guidance you should be able to do it without too much concern.
Preparations to adjust the headlights of a Fiat Stilo
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Stilo
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Fiat Stilo (they are generally marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Fiat Stilo is coherent, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Fiat Stilo, please read our article on this subject.
Whenever you have any further questions about the Fiat Stilo, do not hesitate to consult our Fiat Stilo category.
