If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle to take responsibility – your headlights, also called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Fiat 500 L? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat 500 L.
Why adjust the headlights of your Fiat 500 L?
So let’s start our content with the benefit of adjusting the headlights of your Fiat 500 L. For most people, our headlights are adjusted well enough, and they seem to light up enough during the night. Regrettably this is not always the case and checking this setting, either because the headlights on your Fiat 500 L are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Fiat 500 L for safety
First of all, the headlight adjustment of a Fiat 500 L must be conducted for a simple safety reason. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Fiat 500 L . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Fiat 500 L for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat 500 L?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Fiat 500 L? This setting may appear a bit difficult, but by simply following the guidelines you should be able to complete it without too much issue.
Preparations to adjust the headlights of a Fiat 500 L
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat 500 L
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Fiat 500 L (they are in most cases marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Fiat 500 L is logical, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Fiat 500 L, please go through our content on this subject matter.
If you want more guides on the Fiat 500 L, go to our Fiat 500 L category.
