Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car to take responsibility – your headlights, as well identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Hyundai Ix35? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Hyundai Ix35.
Why adjust the headlights of your Hyundai Ix35?
So let’s start our content with the benefit of adjusting the headlights of your Hyundai Ix35. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Sadly this is not constantly the circumstance and examining this setting, either because the headlights on your Hyundai Ix35 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Hyundai Ix35 for safety
First of all, the headlight adjustment of a Hyundai Ix35 must be conducted for a basic security explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Hyundai Ix35 . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Hyundai Ix35 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Hyundai Ix35?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Hyundai Ix35? This adjustment may appear a bit complicated, but by following the guidance you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Hyundai Ix35
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Hyundai Ix35
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Hyundai Ix35 (they are in most cases marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Hyundai Ix35 is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Hyundai Ix35, please go through our content on this subject matter.
If you wish more tutorials on the Hyundai Ix35, go to our Hyundai Ix35 category.
