If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle guilty – your headlights, as well named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Fiat Panda? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Panda.
Why adjust the headlights of your Fiat Panda?
So let’s start our content page with the interest of adjusting the headlights of your Fiat Panda. For many people, our headlights are adjusted well enough, and they seem to light up enough through the night. Unfortunately this is not always the case and checking this setting, either because the headlights on your Fiat Panda are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Fiat Panda for safety
To begin with, the headlight adjustment of a Fiat Panda must be carried out for a basic safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Fiat Panda . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Fiat Panda for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Panda?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Fiat Panda? This adjustment may seem a bit complicated, but by simply following the instructions you should have the ability to accomplish it without too much problem.
Preparations to adjust the headlights of a Fiat Panda
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Panda
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Fiat Panda (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Fiat Panda is coherent, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Fiat Panda, please browse our content page on this subject.
To discover more tips on the Fiat Panda, take a look at the Fiat Panda category.
