Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car to take responsibility – your headlights, also named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Fiat Fullback? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Fullback.
Why adjust the headlights of your Fiat Fullback?
So let’s start our content with the benefit of adjusting the headlights of your Fiat Fullback. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough during the night. Sadly this is not constantly the case and checking this setting, either because the headlights on your Fiat Fullback are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Fiat Fullback for safety
First of all, the headlight adjustment of a Fiat Fullback must be finished for a very easy security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Fiat Fullback . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Fiat Fullback for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Fullback?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Fiat Fullback? This adjustment may seem a bit complicated, but by following the guidance you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Fiat Fullback
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Fullback
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Fiat Fullback (they are generally marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Fiat Fullback is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Fiat Fullback, please browse our content on this subject.
If you have any further questions about the Fiat Fullback, do not hesitate to consult our Fiat Fullback category.
