If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car responsible – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Fiat Bravo 2? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Bravo 2.
Why adjust the headlights of your Fiat Bravo 2?
So let’s begin our content page with the benefit of adjusting the headlights of your Fiat Bravo 2. For many of us, our headlights are adjusted good enough, and they appear to light up enough through the night. However this is not always the case and checking this setting, either because the headlights on your Fiat Bravo 2 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Fiat Bravo 2 for safety
First of all, the headlight adjustment of a Fiat Bravo 2 must be carried out for a basic safety reason. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Fiat Bravo 2 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Fiat Bravo 2 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Bravo 2?
We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Fiat Bravo 2? This setting may appear a bit complicated, but by following the guidelines you should have the ability to accomplish it without too much concern.
Preparations to adjust the headlights of a Fiat Bravo 2
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Bravo 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Fiat Bravo 2 (they are usually designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Fiat Bravo 2 is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Fiat Bravo 2, please go through our content page on this subject.
If perhaps you have any additional questions about the Fiat Bravo 2, do not hesitate to consult our Fiat Bravo 2 category.
