If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car at fault – your headlights, also called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Chrysler Town & Country? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Chrysler Town & Country.
Why adjust the headlights of your Chrysler Town & Country?
So let’s start our content page with the benefit of adjusting the headlights of your Chrysler Town & Country. For the majority of us, our headlights are adjusted well enough, and they appear to light up enough through the night. Unfortunately this is not constantly the circumstance and examining this setting, either because the headlights on your Chrysler Town & Country are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Chrysler Town & Country for safety
To begin with, the headlight adjustment of a Chrysler Town & Country must be made for a very easy safety motive. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Chrysler Town & Country . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chrysler Town & Country for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chrysler Town & Country?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Chrysler Town & Country? This setting might seem a bit difficult, but by simply following the instructions you should have the ability to do it without too much concern.
Preparations to adjust the headlights of a Chrysler Town & Country
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chrysler Town & Country
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Chrysler Town & Country (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Chrysler Town & Country is logical, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Chrysler Town & Country, please browse our content page on this subject.
If perhaps you have any further questions about the Chrysler Town & Country, do not hesitate to consult our Chrysler Town & Country category.
