Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car responsible – your headlights, as well named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Chevrolet Cobalt? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Cobalt.
Why adjust the headlights of your Chevrolet Cobalt?
So let’s start our content with the benefit of adjusting the headlights of your Chevrolet Cobalt. For many of us, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Unfortunately this is not constantly the case and examining this setting, either because the headlights on your Chevrolet Cobalt are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Chevrolet Cobalt for safety
First of all, the headlight adjustment of a Chevrolet Cobalt must be made for a basic security motive. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Chevrolet Cobalt . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Cobalt for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Cobalt?
We will now go forward to the section that concerns you the most in this post, how to adjust the headlights of his Chevrolet Cobalt? This setting may seem a bit complex, but by following the guidance you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Chevrolet Cobalt
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Cobalt
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Chevrolet Cobalt (they are in most cases marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Chevrolet Cobalt is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Cobalt, please browse our content on this subject.
If perhaps you have any further questions about the Chevrolet Cobalt, do not hesitate to consult our Chevrolet Cobalt category.
