The safety of a motor vehicle is important. Even if the Chrysler Town & Country are economic holes, certain routine service works are crucial. In this article we will explain to you when to replace the brake discs of your Chrysler Town & Country? To accomplish this, to begin with, we will discover what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Chrysler Town & Country, and, finally, how to change them with new ones.

change-brake-discs-chrysler-town-&-country

Interest of the brake discs of a Chrysler Town & Country

We begin our article by explaining what the brake discs of a Chrysler Town & Country are used for, it will enable you to discover why it is essential to make sure that they are constantly in good functioning conditions.
Brake discs are the main part of your braking system. In fact, braking on an Chrysler Town & Country is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will bring about your Chrysler Town & Country to brake.

When to replace the brake discs of a Chrysler Town & Country?

We will now move on to the part that most certainly attracts you to this content, namely, when replacing the brake discs of a Chrysler Town & Country? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two components are wearing parts and they will, as time passes and specifically the friction when braking wears out and loses braking power. We will now detail the different solutions to know when to change them:

  • We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Chrysler Town & Country , however it is essential to know that depending on your driving style and the type of journey this can vary considerably. In fact, if you principally drive on the motorway and your brakes are only slightly used, this value can increase, on the other hand, if you only drive in built-up areas, it can decrease.
  • A simple and powerful technique to find out the state of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A basic visual technique to know when to replace the brake discs on your Chrysler Town & Country is to remove the wheels after the vehicle has been set on stands. Once taken out, you will be able to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Chrysler Town & Country?

Finally, to end this content we will fairly quickly describe how to replace the brake discs of your Chrysler Town & Country. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Chrysler Town & Country, don’t hesitate to seek advice from our content which teaches you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:

  • Put your Chrysler Town & Country on stands, take off the wheels you want to action on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
  • Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

To discover more tips on the Chrysler Town & Country, take a look at the Chrysler Town & Country category.