Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle guilty – your headlights, also identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Chevrolet Silverado? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Silverado.
Why adjust the headlights of your Chevrolet Silverado?
So let’s start our content with the benefit of adjusting the headlights of your Chevrolet Silverado. For most of us, our headlights are adjusted well enough, and they appear to light up enough at nighttime. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Chevrolet Silverado are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Chevrolet Silverado for safety
To begin with, the headlight adjustment of a Chevrolet Silverado must be achieved for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Chevrolet Silverado . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Silverado for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Silverado?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Chevrolet Silverado? This setting might seem a bit difficult, but by simply following the guidance you should be able to perform it without too much concern.
Preparations to adjust the headlights of a Chevrolet Silverado
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Silverado
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Chevrolet Silverado (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Chevrolet Silverado is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Silverado, please read our content on this subject.
If you wish more guides on the Chevrolet Silverado, go to our Chevrolet Silverado category.
