If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to take responsibility – your headlights, also named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Acura TSX? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Acura TSX.
Why adjust the headlights of your Acura TSX?
So let’s start our content page with the benefit of adjusting the headlights of your Acura TSX. For many people, our headlights are adjusted good enough, and they appear to light up enough at nighttime. Unfortunately this is not always the case and examining this setting, either because the headlights on your Acura TSX are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Acura TSX for safety
To begin with, the headlight adjustment of a Acura TSX must be achieved for a simple safety explanation. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Acura TSX . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Acura TSX for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Acura TSX?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Acura TSX? This setting might seem a bit complicated, but by simply following the guidance you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a Acura TSX
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Acura TSX
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Acura TSX (they are generally marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Acura TSX is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Acura TSX, please go through our content page on this subject.
If you need more guides on the Acura TSX, go to our Acura TSX category.
