Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car guilty – your headlights, as well identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Acura TL? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Acura TL.
Why adjust the headlights of your Acura TL?
So let’s start our article with the benefit of adjusting the headlights of your Acura TL. For many of us, our headlights are adjusted sufficiently, and they seem to light up enough at nighttime. However this is not constantly the case and looking at this setting, either because the headlights on your Acura TL are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Acura TL for safety
To begin with, the headlight adjustment of a Acura TL must be finished for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Acura TL . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Acura TL for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Acura TL?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Acura TL? This setting may seem a bit difficult, but by simply following the recommendations you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a Acura TL
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Acura TL
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Acura TL (they are in most cases designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Acura TL is coherent, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Acura TL, please browse our article on this subject matter.
If you need more guides on the Acura TL, go to our Acura TL category.
