Your car’s handbrake is a obligatory security feature according to the highway code, in fact , it aims to stop your Peugeot Rifter, even over a slight incline. It must be in addition to the main brake system controls. It will be possible that after a while the wire system of the hand brake will loosen up and you will not really pass the technical control or you may feel that it is no longer stopping your car. To cope with these complications, we will look at how to adjust the hand brake on your Peugeot Rifter . To get this done, first we will see the adjustment of a manual handbrake on Peugeot Rifter , after that, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Peugeot Rifter?
So we start out our content with the hand brake adjustment of a Peugeot Rifter in its manual version. This version works in a simple way with a system of wire and screws that allow you to manage the tension in the device and so to modify the stroke in the lever of the handbrake. To act on it you will need to act on these screws in order to extend the handbrake cable of the Peugeot Rifter . In any case, before adjusting the hand brake, you must be sure your back wheels aren’t blocked during the adjustment. Please find below the detailed process to carry out this intervention:
- On the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it up to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to change the cable tension.
- Now screw on the lock nuts upon both sides, make sure to make the same changes on both sides to hold a balanced brake, and be sure the hand brake handle of your Peugeot Rifter has a stroke of about 3 notches.
- Tighten the locknuts and check the fastening of the rims of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimal configuration
.
If you don’t have access to the handbrake flap of the Peugeot Rifter, the adjustment will be precisely the same but it surely will be done by passing below your car at the level of the handbrake handle. Remember to put your car on the stand before any actions.
How do I adjust the automatic handbrake of my own Peugeot Rifter?
Second system of handbrake adjustment upon Peugeot Rifter , this is an automatic handbrake, unlike the manual one, that one is done on the brake drums or perhaps calipers, and it is supposed to adjust automatically for the wear of the brake shoes or pads. It may be that if you before long have to acquire brake pads, the handbrake will suffer power, listed below are the steps for taking to verify if the strain of your handbrake is the appropriate one:
- Realize that an automatic handbrake can’t be modified straight because it is supposed to adapt alone to the have on of the pads or pads of your Peugeot Rifter.
- You can nonetheless verify that the system is working effectively by simply putting the vehicle on the stand and checking out by driving under the motor vehicle that the pads are still in good functioning order.
- For drum brakes will probably be necessary to disassemble the brake systems to verify your the shoes, we encourage you to have it performed by a specialist.
- Be sure you replace your pads if you need to.
What is the price of adjusting the handbrake of Peugeot Rifter by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it concerns a safety component of your car, namely the adjustment in the handbrake of the Peugeot Rifter , we counsel you to go to a repair shop who are able to adjust the handbrake for the about fifty euros . When you have problems with vibrations when braking on Peugeot Rifter, do not hesitate to refer to our content which deals with this problem.
If you want more guides on the Peugeot Rifter, go to our Peugeot Rifter category.
