Whether you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple realignment, and in this article content, we will find out how to adjust the low beam lights of your volvo v90? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your volvo v90.
Why set the low beam lights of your volvo v90?
So let’s start our article content with the point of adjusting the low beam lights of your volvo v90. For most of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and looking at this setting, either because the low beams of your volvo v90 are not lighting up well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your volvo v90 for security is a good option.
To start, the adjusting of the dipped headlights of an volvo v90 must be done for a ordinary security cause. Whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an volvo v90 for law justifications
Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a volvo v90?
We will now go forward to the part that interests you the more in this article content, how to adjust the low beams of his volvo v90? This setting may appear a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a volvo v90
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his volvo v90
Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your volvo v90 (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your volvo v90 is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your volvo v90, please go through our article content on this subject.
Whenever you have any further questions about the volvo v90, do not hesitate to consult our volvo v90 category.
