Regardless you feel you can’t see properly after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this common realignment, and in this content, we will discover how to adjust the low beam lights of your Volkswagen Touran 3? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Touran 3.

set-low-beam-headlights-volkswagen-touran-3

Why adjust the low beam lights of your Volkswagen Touran 3?

So let’s start our content with the point of adjusting the low beam lights of your Volkswagen Touran 3. For many people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking out this setting, either because the low beams of your Volkswagen Touran 3 are not illuminating well, or because you have the feeling that they are too low or too powerful is a good plan .

Adjusting the low beam of your Volkswagen Touran 3 for security is a good plan.

First of all, the adjusting of the dipped headlights of an Volkswagen Touran 3 must be done for a basic security reason. Regardless it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore necessary for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Volkswagen Touran 3 for legal reasons

Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Volkswagen Touran 3?

We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Volkswagen Touran 3? This setting may appear to be a bit complicated, but if you stick to the recommendations you should be able to do it without too much issue.

Preparations to set the low beam of a Volkswagen Touran 3

Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure precisely.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Volkswagen Touran 3

Once your motor vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Touran 3 (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the low beam setting of your Volkswagen Touran 3 is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Volkswagen Touran 3, please read our content on this subject.

If perhaps you have any further questions about the Volkswagen Touran 3, do not hesitate to consult our Volkswagen Touran 3 category.