If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car to blame – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your volvo v90? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your volvo v90.

adjust-headlights-volvo-v90

Why adjust the headlights of your volvo v90?

So let’s start our article with the benefit of adjusting the headlights of your volvo v90. For many people, our headlights are adjusted good enough, and they appear to light up enough at nighttime. However this is not always the circumstance and looking at this setting, either because the headlights on your volvo v90 are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your volvo v90 for safety

First of all, the headlight adjustment of a volvo v90 must be achieved for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your volvo v90 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a volvo v90 for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a volvo v90?

We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his volvo v90? This adjustment may appear a bit complicated, but by simply following the recommendations you should be able to complete it without too much problem.

Preparations to adjust the headlights of a volvo v90

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his volvo v90

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, locate the screws for horizontal and vertical modification of the headlights of your volvo v90 (they are usually marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your volvo v90 is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your volvo v90, please go through our article on this subject.

To find more tips on the volvo v90, take a look at the volvo v90 category.