Regardless you feel you can’t see properly through the night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your automobile to blame – your low beams. Even though this adjustment may look easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple modification, and in this document, we will find out how to adjust the low beam lights of your Volvo S90? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volvo S90.
Why adjust the low beam lights of your Volvo S90?
So let’s commence our document with the benefit of adjusting the low beam lights of your Volvo S90. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and looking at this setting, either because the low beams of your Volvo S90 are not illuminating well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Volvo S90 for security is a good plan.
To start, the adjusting of the dipped headlights of an Volvo S90 must be done for a elementary security cause. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volvo S90 for legal reasons
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volvo S90?
We will now go forward to the section that interests you the most in this document, how to adjust the low beams of his Volvo S90? This setting may seem to be a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volvo S90
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volvo S90
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volvo S90 (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Volvo S90 is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Volvo S90, please examine our document on this subject.
To discover more tips on the Volvo S90, take a look at the Volvo S90 category.
