Regardless whether you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your car to blame – your low beams. Despite the fact this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common realignment, and in this content page, we will find out how to adjust the low beam lights of your Buick Regal? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Buick Regal.
Why adjust the low beam lights of your Buick Regal?
So let’s begin our content page with the interest of adjusting the low beam lights of your Buick Regal. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your Buick Regal are not illuminating well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Buick Regal for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Buick Regal must be done for a basic security cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Buick Regal for legal reasons
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Buick Regal?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Buick Regal? This setting may appear to be a bit complicated, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Buick Regal
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Buick Regal
Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Buick Regal (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Buick Regal is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Buick Regal, please examine our content page on this subject.
To discover more tips on the Buick Regal, take a look at the Buick Regal category.
